How do I know if the UNI is leveled?

Besides using the bubble on the survey pole, the LED-ring on the UNI can indicate if the UNI is level.

In the LED leveller mode, the UNI uses two axes to level. The Y-axis is represented by a green colour on the led-ring.

The X-axis is represented by a blue colour on the led-ring.

These coloured axes indicate the direction of movement to level the UNI . Simply level the UNI until the Led-ring turns solid green for the best result.

The UNI will always initiate in leveler mode, the standard mode set on first-use. After initialization, it switches to the mode set in UNI-Connect. To set LED modes, open UNI-Connect, go to LED settings under “Settings” and select the desired mode.

Want to know more about surveying with the UNI-GR2 as part of the UNI-Complete package? Click here

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.