How do I reset the UNI-GR1?

Power button

With a short press of the power button (2) on the keyboard, the UNI-GR1 will turn on, start initialising and during this period, the power button will flash green. Once the UNI-GR1 is initialized, the power button will turn solid green and the UNI-GR1 will automatically go in to WiFi and Bluetooth discovery mode.

By pressing the same button when the UNI-GR1 is initialized for a longer period of time, you will first see a white spinning light on the LED-ring (1). This light later turns blue after which it turns red. In case you release the button when the light on the LED-ring (1) is turning red, all your preferred settings on the UNI-GR1 will be replaced for stock settings.

General Settings

Alternatively, you can reset the UNI-GR1 by opening UNI-Connect, going in to Settings -> General, scroll down and click the red reset button.

Which settings will be changed on the UNI-GR1? 

– Led ring settings
– APN settings
– All the profile settings like;
– GNSS correction settings
– NTRIP mountpoints

Did this answer your question? Thanks for the feedback There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us