What are the possible LED-Ring statuses?
LED-RING
The LED-ring is enclosed behind the translucent ring in the center of the UNI. The colour(s) of this ring provides the user with information as in the table below.
The table below describes the meaning of the different LED ring colours:
| LED Modes | LED status: |
| Leveller | |
| Solid Green | UNI is level |
| Green / blue axis indicators | UNI is not level |
| Working Light | |
| Solid White | |
| Safety Light | |
| Flashing orange | |
| FIX level | |
| Solid Green | Solution: Fix |
| Solid Blue | Solution: Float |
| Solid Purple | Solution: Single |
| Off | |
| No light | |
| Error / Status Messages | |
| Flashing Red | NFC-Tag not synchronised / UNI-Cloud not authenticated. |
| Flashing Blue | NFC-tag synchronised / UNI-Cloud authenticated |
| Fading Green | UNI-GRx is powering off |
| Running white | Downloading software update |
| Solid RED | Factory Reset taking place |
| Upon clicking and holding power button | Action performed when power button released |
| Running White (1-10 seconds) | UNI-GRx will turn off |
| Running Blue (11-30 seconds) | UNI-GRx will go in to Bluetooth / WiFi discovery mode |
| Running Red (30-60 seconds) | UNI-GRx will perform a factory reset |
When the LED-ring is turning RED and you don’t want a reset, keep holding the button until it runs white again and then release power button.
Set LED-mode within UNI-Connect
All this can be easily changed by the user. There is no need for complex settings. Just simply go to UNI-Connect‘s main “Settings” and then go to LED. Here you can set your preferred LED status.
Safety mode can come in handy if you want to make sure that you will be seen in the dark, for example when you have a construction work at night next to the highway. The Fix level mode can come in handy if you want a simpler way for checking on your fix status. By setting this option, you only have to wait until the UNI-GRx‘s LED ring is green, indicating you have a fixed solution.