How can I use the adapter on the survey pole?

Where can I find the adapter?

If you have ordered the UNI-GR2 from, you will find the adapter to connect the UNI-GR2 to any standard survey pole in the rugged pelican case of the UNI-GR2. In the picture below we show where you can find the adapter.

What are the sizes of the adapter?

The size of the survey pole fitting is 5/8" and the fitting underneath the UNI-GRx is 3/8".

These sizes are normally used in the world of surveyors. The tripods and survey poles have the same fitting, what makes the UNI-GRx universal. You can use any other adapter for the survey pole and the UNI-GRx. Just make sure that your pole or adapter fits the UNI's sizes when you order elsewhere.

Tip: If you're using another adapter that is not from marXact, then make sure that you have set the right pole height before you begin surveying. Click here to learn more about the Survey settings.

How do I place the adapter on the survey pole?

Get the adapter from the suitcase where the UNI is normally in. Install it on the top of the survey pole and make sure it is screwed on tight. Then get the UNI-GRx and place it on the adapter. Rotate the UNI on the top until it is screwed on tight.